Fluke

Fluke 1760TR 基本三相电能质量记录仪

功率分析仪
Fluke Fluke 1760TR 属于功率分析仪类测试测量仪器,主要规格:存储深度Linear;分辨率16 ppm。质保:主机 3 年。
电话咨询 133 1157 1181 暂无手册
应用场景:
电源测试新能源

规格参数

参数数值
Statistical evaluationPower quality statistics according 至 EN50160 和 DISDIP tables like ITIC, CEBEMA, ANSI
Event listDips, swells 和 interruptions are detected 和 stored 在 event list. Also any trigger which fires generates event added 至 this list.
Continuous recordingFluke 1760 records rms values together 带 corresponding 最小 和 最大 values 用于: • 电压 • 电流 • Power P, Q, S • Power Factor • kWh • Flicker • Unbalance • 频率 • Harmonics/Interharmonics Continuously 带 following time aggregations: Day 10 min Free Interval, e.g.: 15 min, 2 h
触发记录rms Aggregation time is adjustable between 10 ms (1/2 cycle), 20 ms (1 cycle), 200 ms (10/12 cycles) 或 3 sec (150/180 cycles).
示波器 :采样率 is 10.24 kHz 用于 all 8 channels
Mains signallingPhases 和 N-conductor, 电压 和 电流
Online 模式Variable refresh rate. This feature allows verification 的 仪器 set up 和 delivers quick overview 的 示波器, 瞬态 和 events.
Intrinsic 不确定度refers 至 reference conditions 和 is guaranteed 用于 two years
质量体系developed, manufactured as 符合 ISO 9001: 2000
Environment conditionsOperating temp. 量程 0°C 至 +50°C; 32°F 至 +122°F
工作温度量程-20°C 至 +50°C; -4°F 至 +122°F
储存温度量程20°C 至 +60°C; -4°F 至 140°F
温度Change 的 amplification through 温度: < 0.005% / K
Climatic 等级B2 (IEC 654-1), -20°C 至 +50°C; -4°F 至 +122°F
工作海拔2000 m: 最大 600 V CAT IV 1, power supply: 300 V CAT III 5000 m: max 600 V CAT III 1, power supply: 300 V CAT II
参考 conditions23°C ±2 K < 60% rH; 74°F ±2 K < 60% rH
功率10.24 kHz, 采样率 is synchronized 至 mains 频率.
信号declared 输入电压 Udin
Averaging10 分钟 intervals
外壳Insulated, robust plastics housing
电磁兼容Emission 类别- as 符合 IEC/EN 61326-1
抗扰度IEC/EN 61326-1
安全IEC/EN 61010-1 2nd edition
电池组在 case 的 power supply failure internal battery maintains supply 用于 最高 40 分钟. Afterwards, 或 在 case 的 discharged accumulators Fluke 1760 is turned off 和 continues 测量 带 latest settings as soon as supply 电压 returns. battery can be replaced by user.
显示屏Fluke 1760 features LED indicators 用于 status 的 8 channels, phase sequence, power supply (mains 或 accumulator), memory usage, time synchronization, 和 数据 传输.
通道数3-color LEDs 每 channel 用于: 过载 condition Under load condition
存储深度Linear
接口Ethernet (100 MB/s), compatible 至 Windows® 98/ME/NT/2000/XP RS 232, external modem 通过 RS 232
Baud 率 用于 RS 2329600 Baud 至 115 kBaud
尺寸325 x 300 x 65 mm (2.8 x 11.8 x 2.6 在)
重量appr. 4.9 kg; 10.8 lbs (无 accessories)
质保2 years
校准 间隔1 year recommended 用于 类别-, otherwise 2 years
50Hz系统量程50 Hz ±15% (42.5 Hz 至 57.5 Hz)
60Hz系统量程60 Hz ±15% (51 Hz 至 69 Hz)
分辨率16 ppm
不确定度 用于 频率 measurements< 20 ppm
不确定度 的 内部 clock< 1 s/day
测量间隔Aggregation 的 interval values as 符合 IEC 61000-4-30 类别-
最小-最大值Half cycle, e.g.: 10 ms rms values 在 50 Hz
瞬态采样率 100 kHz 至 10 MHz 每 channel
谐波as 符合 IEC 61000-4-7:2002: 200 ms
闪变as 符合 EN 61000-4-15:2003: 10 min (Pst), 2 h (Plt)
输入Each channel is equipped 带 passive low-pass filter, anti-aliasing filter 和 16-bit /D converter. 全通道are sampled synchronously 带 common quartz-controlled clock pulse. filters protect against 电压 瞬态 和 limit signal rise rate, reduce high 频率 components 和 especially noise 电压 above half 采样率 的 /D converter by 80 dB, thus achieving very small measuring errors 在 exceptionally large amplitude 量程. This is also valid under extreme operating conditions like transient voltages 在 output 的 converters.
传感器 安全最高 600 V CAT IV depending 在 sensor
Basic 安全300 V CAT III
标称 电压 (有效值)100 mV
量程(峰值)280 mV
过载 capacity (有效值)1000 V, continuously
电压 上升 率最大 15 kV/µs
不确定度 在 参考 conditionsUncertainty including 电压 sensors is 在 compliance 带 IEC 61000-4-30 类别-. All 电压 sensors are suitable 用于 DC 最高 5 kHz
带 传感器 1000 V0,1% 在 Udin = 480 V 和 600 V P-N
传感器 600 V0,1% 在 Udin = 230 V P-N
Intrinsic 不确定度 用于 谐波类别 I as 符合 EN 61000-4-7:2002
AgingChange 的 amplification due 至 ageing: < 0.04% / year
Common 模式 rejection> 100 dB 在 50 Hz
噪声Noise 电压, input short-circuited: < 40 µV
直流±(0.2% rdg + 0.1% sensor)

同档机型对比

Fluke Fluke 1760TR 基准规格:同档其他机型推荐
品牌型号
是德科技 Keysight CX3322A
是德科技 Keysight CX3324A
罗德与施瓦茨 R&S HMC8015

匹配规则:同档其他机型推荐。