产品大图
Fluke
Fluke 190 III ScopeMeter® 测试工具
示波器
Fluke Fluke 190 属于示波器类测试测量仪器，主要规格：带宽20 MHz 和 10 kHz；采样率125 MS/s。质保：主机 3 年。
电话咨询 133 1157 1181
暂无手册
应用场景：
规格参数
符合标准
| 参数 | 数值 |
|---|---|
| 190-062 | 190-102 190-202 190-502 190-104 190-204 190-504 |
| 通道数 | Pulse width qualified by time Allows 用于 triggering t, =t, ≠ t, where t is selectable 在 最小 steps 的 0.01 div 或 50 ns |
| 带宽 | 20 MHz 和 10 kHz |
| 上升时间 | 5.8 ns 3.5 ns 1.7 ns 0.7 ns 3.5 ns 1.7 ns 0.7 ns |
| 输入 | CAT III 1000 V / CAT IV 600 V (safety designed banana input connectors) — |
| Polarity | Normal, Inverted, Variable |
| 分辨率 | 1120 像素 x 765 像素 |
| 精度 | ± (0.6 % + 6 计数) — |
| 采样率 | 125 MS/s |
| 存储深度 | 30 waveform memories plus 10 recording memories plus 9 screen copy memories |
| 时基范围 | 4 ms/div 至 2 min/div |
| Glitch capture | 8 ns |
| 显示屏 | 133 mm x 90 mm (5.3 在 x 3.5 在) LCD |
| Visible 屏幕 宽度 | 12 divisions horizontally 在 scope mode |
| 数字余辉模式 | Off, short, medium, long, infinite 和 envelope mode |
| 波形 mathematics | One (190-xx2) 或 two (190-x04) mathematical operations 在 2 input channels ( 和 B, C 和 D): add, subtract, multiply; X-Y-mode; 频率 Spectrum using FFT |
| Acquisition modes | Normal, Averaged, Auto, Single Shot, ScopeRecord™ roll, glitch capture, waveform compare 带 automatic “Pass/Fail testing”; Replay |
| 源 | Any waveform trace 在 any waveform 显示 mode (Scope, ScopeRecord 或 TrendPlot) |
| Modes | Automatic, Edge, Pulse Width, N-Cycle, External (190-xx2) |
| Connect-和- View™ | Advanced automatic triggering that recognizes signal patterns, automatically sets up 和 continuously adjusts triggering, time base 和 amplitude. Automatically displays stable waveforms 的 complex 和 dynamic signals like motor drive 和 control signals. Can be switched off if preferred. |
| 时间 delay | 1 full screen 的 pre-trigger view 或 最高 100 screens (=1,200 divisions) 的 post-trigger delay |
| Dual slope triggering | Triggers 在 both rising 和 falling edges alike |
| N-cycle triggering | Triggers 在 N-th occurrence 的 trigger event; N 至 be set 在 量程 2 至 99 |
| Replay | Manual 或 continuous replay. Displays captured 100 screens as “live” animation, 或 under manual control. Each screen has date 和 time-stamp. |
| Replay 储存 | Ten sets 的 100 screens each can be saved internally 用于 later recall 和 analysis. Direct 存储 的 additional sets 在 external flash memory drive through USB host port. |
| Window | Automatic, Hamming, Hanning 或 None |
| 自动窗口 | Digitally re-samples acquired waveform 至 get optimum 频率 分辨率 在 FFT resultant. |
| 垂直灵敏度 | Linear/Logarithmic (在 volts 或 电流) |
| 频率轴 | 频率范围 automatically set as function 的 timebase 量程 的 示波器 |
| 波形 compare | Provides 存储 和 显示 的 reference waveform 用于 visual comparison 带 newly acquired waveforms. Reference is derived 自 acquired waveform 和 can be modified 在 示波器. |
| Pass/Fail testing | 在 waveform compare mode, 示波器 can be set 最高 store only matching (“Pass”) 或 only non-matching (“Fail”) acquired waveforms 在 replay memory bank 用于 further analysis. |
| 功率 | Auto ‘power down’ 带 adjustable power down time. Automatic ‘显示 off’ 带 adjustable power down time. 在-screen battery power indicator |
| Dual horizontal lines | 电压 在 cursor 1 和 在 cursor 2, 电压 between cursors |
| Dual vertical lines | Cursors may be used 至 identify Min, Max 或 Average value 的 any datapoint 在 record, 带 time between cursors, time 自 start 或 absolute time. |
| Single vertical 线性 | Min-Max 和 Average 电压 在 cursor position; 频率 和 rms-value 的 individual 频率 component 在 FFT Resultant |
| Advanced functions | mA*s (电流-over-time, between cursors); V*s (电压-over-time, between cursors); W*s (energy, between cursors) |
| 缩放 | Ranges 自 full record overview 至 缩放 在 最高 sample level, 在 any record length. |
| 读数数量 | One 在 time 通过 DMM input 最高 4 automatic scope 测量 simultaneously |
| Advanced 计 functions | Auto/manual ranging, relative 测量 (Zero reference), TrendPlot™ recording |
| 15 Hz 至 60 Hz | ± (1 % + 10 计数) ± (1.5 % + 10 计数) |
| 60 Hz 至 1 kHz | ± (2.5% + 15 计数) — |
| 60 Hz 至 20 kHz | — ± (2.5 % + 15 计数) |
| Voltmeter ranges | 500 mV, 5 V, 50 V, 500 V, 1,100 V |
| 量程 | Normal view: 5 s/div 至 30 min/div; 在 view-all mode: 5 min/div 至 48 hr/div (overview 的 total record) |
| 通断 | Beeper on < 50 Ω (± 30 Ω) — |
| 二极管测试 | Up 至 2.8 V — |
| 电流 (A) | dc, ac, ac+dc using 可选 电流 clamp 或 shunt 缩放 factors: 0.1 mV/, 1 mV/ 至 100 V/ 和 400 mV/ |
| 温度 | -20 °C 至 60 °C (-4 °F 至 140 °F) |
| 最小/最大值 | Min/max values are created 在 samples that are measured 在 high 采样率 ensuring capture 和 显示 的 glitches. |
| Recording modes | Single sweep, continuous roll; Start-在-Trigger (through external); Stop-在-Trigger (through external) Single sweep, continuous roll; Start-在-Trigger (through any channel); Stop-在-Trigger (through any channel) |
| Stop-on-触发 | ScopeRecord mode can be stopped by individual trigger event, 或 by interruption 的 repetitive trigger signal, through any input channel (through External 在 190-XX2 Series) |
| 水平时基 | Time 自 start, time 的 day |
| Recorded timespan | 4.8 sec 至 40 hr |
| 时间/division 在 ‘view all’ 模式 | 0.4 s/div 至 4 h/div |
| Recorded 时间 跨度 | 最高 22 days, 带 分辨率 的 102 秒; 最高 5.5 days 用于 4 读数. |
| Recording 模式 | Continuous recording, 起售价 5 s/div 带 automatic time-scale compression |
| 测量速度 | Three automatic 测量 次/秒 或 more |
| 额定 最大 floating 电压 | CAT III 1000 V / CAT IV 600 V (最大电压 between any contact 和 earth-ground 电压 level) |
| 30 waveform memories | Each memory can contain 最高 2 或 4 waveforms plus corresponding setups. |
| 10 recording memories | Each may contain: 100 Screen Replay sequence, 或 ScopeRecord Roll-mode recording (2 或 4 traces), 或 TrendPlot recording 的 最高 4 测量 |
| 外部 数据 储存 | 在 PC, using FlukeView™-2 Software, 或 direct 存储 在 external flash memory drive (最大 32 GB) through USB host port |
| Screencopies | 在 PC, using FlukeView™-2 Software, 或 internally (在 仪器) which can be copied 在 至 external flash memory drive as .BMP-file, through USB host port |
| Volatility | Saving is done 在 non-volatile Flash-ROM 和 all 数据 is secured, independent 的 battery 或 power status. |
| Real-时间 clock | Provides date 和 time stamp information 用于 ScopeRecord, 用于 100 Screen Replay sequences 和 用于 TrendPlot recordings. |
| Design | Rugged, shock-proof 带 integrated protective 皮套. Handstrap 和 hangstrap included as 标准. Kensington lock supported 至 lock down 仪器 when left unattended. |
| Drip 和 防尘 proof | IP51 according 至 IEC60529 |
| 振动 | Shock 30 g, vibration (sinusoidal) 3 g / 0.03 g2/Hz (Random), according 至 MIL-PRF-28800F 类别 2 |
| Brightness | User-adjustable, 最高 300 cd/m2 |
| 尺寸 | 265 mm x 192 mm x 70 mm (10.5 在 x 7.6 在 x 2.8 在) |
| 重量 | 2.1 kg (4.6 lb) 2.2 kg (4.8 lb) |
| 类型 | BP290: 10.8V, 2500 mAh [BP291 (5000 mAh) 可选] BP291: 10.8V, 5000 mAh |
| 电池充电指示器 | Battery has built-在 status indicator 用于 use 带 external charger, next 至 battery status indicator 在 仪器 screen. |
| 电池工作时间（背光低） | 最高 3.5 using BP290 (included), 最高 7 小时 using BP291 (可选) 最高 7 小时 using BP291 (included) |
| 电池充电时间 | 2½ 小时 using BP290; 5 小时 using BP291 Five 小时 用于 BP291 |
| 湿度 | 0 °C 至 10 °C (32 °F 至 50 °F): noncondensing 10 °C 至 30 °C (50 °F 至 86 °F): 95 % (±5 %) 30 °C 至 40 °C (86 °F 至 104 °F): 75 % (±5 %) 40 °C 至 50 °C (104 °F 至 122 °F): 45 % (±5 %) |
| 工作海拔 | CAT IV 600 V, CAT III 1000 V: 最高 2000 m (6 600 feet) CAT IV 300 V, CAT III 600 V, CAT II 1000 V: 最高 4000 m (13 000 feet) |
| 储存海拔 | 12 km (40,000 ft) |
| Electro-Magnetic 兼容性 (电磁兼容) | IEC 61326-1: Industrial; CISPR 11: Group 1, 类别; Korea (KCC): 类别 Equipment (Industrial Broadcasting 和 Communication Equipment); USA (FCC): 47 CFR 15 subpart C. |
| 接口 | Two USB-ports provided. Ports are fully insulated 自 仪器’s floating 测量 circuitry. USB-host port directly connects 至 external flash memory drive (最高 32 GB) 用于 存储 的 waveform 数据, 测量 results, 仪器 settings 和 screen copies. Alternatively, this USB- port may be used 至 connect WiFi Adapter 用于 wireless PC connectivity. mini-USB-B is provided which allows 用于 interconnection 至 PC 用于 remote control 和 数据 传输 under PC-control using FlukeView-2. |
| 输出 | Dedicated probe-cal output 带 reference contact provided, fully insulated 自 any 测量 input channel. Generator Output: 1.225 Vpp / 500 Hz square wave |
| 质保 | 3 years 在 main 仪器, 1 year 在 battery 和 accessories |
| 电池充电器/电源适配器 | BC190/830 |
| Li-Ion 电池 pack | BP290 (10.8V, 2500 mAh) BP291 (10.8V, 5000 mAh) |
| 电压探头组 | 2 pcs VPS421-x, ruggedized industrial-grade probes, 100:1, 150MHz 带 shrouded 4mm banana tip 和 large jaw alligator clips (one red, one blue) 2 pcs VPS410-II-x, 10:1 电压 probes, 500 MHz, (one red, one blue) 4 pcs VPS421-x, ruggedized probes, 100:1, 150 MHz, (red, blue, grey, green) 4 pcs VPS410-II-x, 10:1 电压 probes, 500 MHz, (one red, one grey, one blue, one green) |
| 测试引线 | TL175 (one red, one black) 带 test pins — |
| 其他 | Li-Ion battery (BP290 或 BP291, see above), Battery charger (BC190) 带 universal power cord set, Hangstrap, Handstrap (user selectable 用于 left- 或 right hand use), 下载 information 用于 user manual 和 FlukeView®-2 demo package (带 restricted functionality), 和 USB interface cable 用于 PC connectivity. Feedthrough cable terminator, 50 Ω (one 每 channel, 190-50x only). |
| 可选 configuration | Each 型号 is available as ‘boxed’ version, described above, 或 带 可选 SCC293 set included. SCC293 comprises: CXT293 rugged protective carrying case, full-version FlukeView PC software (activation code) 和 WiFi dongle 用于 wireless PC-connectivity using FlukeView-2 software. |
| 可选 附件 | SCC293, VPS101 - 1:1 电压 probe; VPS510-x - wide 带宽 compact probes; i400s–电流 clamp; HH290–hanging hook; CXT293–protective carrying case; TRM50–BNC Feedthrough cable terminator, 50 Ω, safety designed; EBC290–battery charging bay |
